Parts Supplied with the Lazy Lee Unit
Hardware Items Supplied
Shelf Pin (48 Pieces Supplied)
Small Wooden Dowel (16 Pieces Supplied)
Long Wooden Dowel (2 Pieces Supplied)
-
Shelf Pin (48 Pieces Supplied)
This is a nickel metal pin used in the shelf holes for the attachment and support of shelves. -
Small Wooden Dowel (16 Pieces Supplied)
This small wooden dowel is used to fasten the Half-Moon Shelf Brace to the Half-Moon Shelves -
Long Wooden Dowel (2 Pieces Supplied)
The Long Wooden Dowel is used only when fastening the Half-Moon Supporting Brace to the unit at the Middle Disk Location in a vertical installation. For the Half-Moon Supporting Brace attachment to the Half Moons the small wooden dowel is used.
ROTAS Bearing Assembly Items
Top ROTAS Bearing Raceway (Part of the ROTAS Bearing Assembly)
Ball Bearings (Part of the ROTAS Bearing Assembly)
Bottom ROTAS Bearing Raceway (Part of the ROTAS Bearing Assembly)
Stabilization Dock (1 Piece Supplied)
ROTAS Bearing Assembly - 1 Full Set of items shown
Stabilizing Pin & Busing (1 Piece Supplied)
-
Top ROTAS Bearing Raceway (Part of the ROTAS Bearing Assembly)
The Top ROTAS Bearing Raceway and the Bottom ROTAS Bearing Raceway are the same and one is turned around for installation so that both the raceways face each other, and the Ball Bearings are placed within the two raceway recesses. -
Ball Bearings (Part of the ROTAS Bearing Assembly)
The Ball Bearings sit into the ROTAS Bearing Top and Bottom Raceway -
Bottom ROTAS Bearing Raceway (Part of the ROTAS Bearing Assembly)
The Bottom ROTAS Bearing Raceway and the Top ROTAS Bearing Raceway are the same and one is turned around for installation so that both the raceways face each other, and the Ball Bearings are placed within the two raceway recesses. -
Stabilization Dock (1 Piece Supplied)
The Stabilization Dock is the first item on the floor, into which the ROTAS Bearing Assembly will be installed. -
ROTAS Bearing Assembly - 1 Full Set of items shown
The Complete ROTAS Revolving Utility Bearing Assembly. Note the number of the ball bearings in a ROTAS bearing will never fill the raceway. It is designed to be about 75% full. -
Stabilizing Pin & Busing (1 Piece Supplied)
Used to attach the centre of the Lazy Lee Revolving Storage Unit to a Stabilizing attachment at the top.
Cabinet Panel Parts
Bottom Disk (1 Supplied)
Middle Disk (1 Supplied)
Top Disk (1 Supplied)
Side Partition (4 Supplied)
Middle Partition (2 Supplied)
Rectangular Shelf (12 Supplied)
Half Moon Shelf (12 Supplied)
Half-Moon Supporting Brace (4 Supplied)
-
Bottom Disk (1 Supplied)
The Bottom Disk installs on to the Rotas Bearing, with the Circular recess towards the bearing. The top side of the Bottom Disk has a rout (Grooved Recess) to receive the Middle Shelf and four keyhole slots to receive the Lockdowel fasteners of the two side partitions. -
Middle Disk (1 Supplied)
The Middle Disk installs on to the two Side Partitions - To fasten the Middle Disk to the two Side Partitions of the bottom section, there are four keyhole slots to receive the Lockdowel fasteners at the top of the two Side Partitions already assembled. The top side of the Bottom Disk has a rout (Grooved Recess) to receive the Middle Shelf and four keyhole slots to receive the Lockdowel fasteners of the two side panels. -
Top Disk (1 Supplied)
The Top Disk installs on to the two Side Partitions - To fasten the Top Disk to the two Side Partitions of the top section, there are four keyhole slots to receive the Lockdowel fasteners at the top of the two Side Partitions already assembled. The top side of the Top Disk has a hole to receive the Stabilizing Pin and Busing that will be used to stabilize the unit to a stabilization device above the Unit. -
Side Partition (4 Supplied)
Two of the Side Partitions attach to the middle of the Bottom Disk, and the Middle Disk, and two more attach to the middle of the Middle Disk and the Top Disk. -
Middle Partition (2 Supplied)
The Middle Partition is slid into the Rout (Etched Groove) in the Side Partitions and the Bottom Disk or the Middle Disk. -
Rectangular Shelf (12 Supplied)
The Rectangular Shelves install on four Shelve Pins. Each shelf has a notched recess where the pins that are installed on to the Side Partition will slip into. The pin being recessed into the Shelf ensures that the shelf does not inadvertently move forward when unloading items from the shelf. -
Half Moon Shelf (12 Supplied)
The Half-Moon Shelves are attached to the outside of the four Side Partitions. The attachment is done with the Lockdowel fasteners, which slip into the wide part of the keyhole in the Side Partition and slid into the narrow part of the keyhole. -
Half-Moon Supporting Brace (4 Supplied)
The Half-Moon Supporting Brace fastens to each of the Half-Moon Shelves with a Short Wooden Dowel. The top of the lower brace and the bottom of the top brace are attached to the Middle Disk using the Long Wooden Dowel, the other ends of the brace are attached to the Bottom Disk and the Top Disk with the Short Wooden Dowel.